Home > News > Content

Hydraulic Shearing Machine Features

Sep 04, 2017

Hydraulic shears are a technical term for metallurgy. Applicable to metal recycling companies, scrap mills, smelting and casting enterprises of various shapes of steel and a variety of metal structures for cold shear, to increase the charge to be qualified.

Features:

1) the use of hydraulic drive, easy to operate, easy maintenance.

2) Working blade length: 400mm, 600mm700mm800mm1000mm1200mm, shear force from 63 tons to 400 tons a total of eight grades. 700mm above the knife-edge shearing machine, especially for cutting scrapped cars.

3) installation without foot screws, no power where the diesel engine can be used as power.

Hydraulic shearing machine mechanical oil filter device

The following three conditions:

① suction oil filter structure is simple, its role is to avoid the oil when the larger particles of pollutants into the pump, the general use of low-precision filter, the maximum filter accuracy does not exceed 30 ~ 50μm, in order to facilitate the maintenance of the oil filter The device at the top or side of the tank should also be considered its circulation should be more than twice the maximum flow in the hydraulic pump to prevent the pump will suck empty;

② oil pressure oil filter installed in the downstream of the hydraulic pump pressure pipeline, to the hydraulic system to send clean pressure oil, usually selected high-precision oil filter, filter accuracy of 3 ~ 20μm, the circulation should not be less than the pressure of oil Maximum flow;

③ return oil filter device in the total return pipe, the external invasion of the system and the system generated within the pollutant filter net, usually also use high-precision oil filter. According to the recent pollution control system theory, the oil tank should reach a certain degree of cleanliness, and in order to avoid the filter due to the infusion of the filter before and after the pressure exceeded, should be installed filter plug sensor in order to change the filter in time.

Hydraulic shears Features:

(1) various models are used hydraulic drive. You can select manual or PLC automatic control operation.

(2) installation without foot screws, in the absence of power can be equipped with diesel engine for power.

(3) out of the package and push the package on both sides of the three-crop form.

(4) squeeze from 63 tons to 400 tons have eight grades, the production efficiency from 0.5 tons / hour to 20 tons / hour.

(5) feeding box size and mass size can be customized according to the user's raw material specifications.

Hydraulic shear machine is suitable for recycling processing plants, scrap car dismantling field, smelting casting industry, various shapes of steel and various metal structural parts of the cold cut, processed into qualified charge.

Q43 series crocodile hydraulic metal shearing machine Features:

First: the use of hydraulic drive, safe and reliable, easy to operate.

Second, the working blade length generally have the following: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm; shear force from 63 tons to 400 tons have eight grades, suitable for different sizes of different requirements of the user choice.

Third: the installation does not need to use the foot screw, no power supply where the diesel engine can be used to facilitate time and effort.