Hydraulic shearing machine is a technical term for metallurgy. It is suitable for metal recovery company, scrap steel plant, smelting foundry enterprises to make cold shear of various shapes of steel and various metal structures in order to add qualified furnace charge.
1 adopt hydraulic drive, easy to operate and easy to maintain.
2 work blade length: 400 mm, 600 mm700mm800mm1000mm1200mm, shear force from 63 tons to 400 tons, a total of eight grades. The cutting machine of over 700mm knife edge is especially suitable for shearing and scrapping automobiles.
The installation need not have the bottom screw, the place that does not have power supply can be driven by diesel engine.
Shear machine is a kind of machine tool, it adopts hydraulic drive, safe performance is reliable, easy to operate. The cutting machine's working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm and 1200mm; The shear force is from 63 tons to 400 tons and eight grades. It is suitable for users of different sizes. Installation of non-bottom foot screws, no power source can be used as engine power. Shearing machine is applicable to metal recycling plants, automobiles and dismantling, smelting foundry industry, for a variety of steel and all kinds of metal materials in the shape of cold cutting, pressing flanging, and powder products, plastic, glass reinforced plastics, insulation materials, rubber pressure molding. The shear machine is divided into different kinds: metal shears, joint punching shears, hydraulic shearing machine bar.
1. Without learning, the machine structure, performance and operation procedures shall not be operated without permission.
2. The lubricating parts of the machine shall be lubricated at least once every class according to the requirements.
3. To add hydraulic oil in the tank, strict use of high quality anti-wear hydraulic oil should be strictly filtered, and sufficient amount of oil should be kept, and the oil should be added immediately when insufficient.
4. The fuel tank should be cleaned and replaced once every six months, but the first cleaning of the filtrate can't exceed one month. Once the new oil has been strictly filtered, it is allowed to be used again.
5. When there is a serious oil spill or abnormal phenomenon at work, stop the car immediately, analyze the reasons and troubleshoot, shall not force the disease to operate.
6. In the process of operation or packing, the machine shall not repair or touch the moving part of the body, and it is forbidden to press the materials in the material box with hands or feet.
7. When the pump, valve and pressure gauge are adjusted, experienced technical workers must be carried out. If the pressure gauge fails, check or update the watch immediately.
CNC shearing machine, the nc shearing machine includes the organism
Computer MCU and feeding table, described on the body is equipped with numerical control buttons, and in the upper and lower feed roller are installed on the body, as described in the body with feed stepper motor, roller described described by feeding the stepping motor drive connections, as described in the side of the body is equipped with tool rest, cutter are installed on tool post, described in the body fixed installation incised knife, described on can move up and down with the rest of the blade and its characteristics is described in the body also is equipped with shear stepper motor, described the computer MCU through the motor drive connected to the stepper motor, described on the cutter by shear stepper motor driver. On the utility model of cutter driven by stepping motor, make the cutter location accurate, step motor starting torque, and can freely adjust the depth of the shear rate, shear shearing machine, the utility model accurately controlled by the body in the computer control, stable and reliable work, according to the design theme of this practical new type produced by the nc shear machine, will certainly to electronics, electrical appliances, motor industry of cutting, cutting hoses such as the use of a positive effect.